Electro-Protector Taillight/Power Trailer
Converter/Isolator Systems
- One Million Plus Operating Cycle Life
- Waterproof Electronic Module
- Automatic Short Circuit Protection
- Automatic Thermal Shutdown
- Automotive Vehicle Spike Protection
- Reversed Polarity Voltage Protection
- Extreme Over-voltage Production
- Operating Temperature -40 Below to 185 Degrees F
P/N; ET3-06-60CB: Taillight 6 amp 3-2 electronic converter
with 60" 4-way connector bracket one-piece assembly
(conveniently installs under hitch crossbar or bumper)
including hardware kit, instructions and clam shell packaging.
P/N; ET3-06-60CBI: Taillight 6 amp 3-2 electronic converter
with interconnect (easy for back-feed installations) on
60" 4-way connector bracket assembly including hard ware
kit, instructions and clam shell packaging.
P/N; ET3-06-60CW: Taillight 6 amp 3-2 electronic converter
with 60" wire leads for applying to vehicle 7-way round
connector (optional ETS P/N CSW-1807-HK) including hardware
kit, instructions and clam shell packaging.
P/N; EP3-10-60CB: Power 10 amp 3-2 electronic
converter/isolator with 60" 4-way connector bracket
one-piece assembly (conveniently installs under hitch crossbar
or bumper) including hardware kit, instructions and clam shell
packaging.
P/N; EP3-10-60CBI: Power 10 amp 3-2 electronic
converter/isolator with interconnect (easy for back-feed
installations) on 60" 4-way connector bracket assembly
including hardware kit, instructions and clam shell packaging.
P/N; EP3-10-60CW: Power 10 amp 3-2 electronic
converter/isolator with 60" wire leads for applying to
vehicle 7-way round connector (optional ETS P/N CSW-1807-HK)
including hardware kit, instructions and clam shell packaging.
P/N; EPL3-10-60CBI: Low-side 10 amp power 3-2 electronic
converter/isolator is especially designed for those selective
1999 and newer vehicles with wiring systems that have a 12
volt ground circuit used for switching on and off rather than
the standard positive circuit. Kit includes interconnect (easy
for back-feed installations) on 60" 4-way connector
bracket assembly, hardware kit, instructions and clam shell
packaging.
P/N; EPI2-10-60CBI: Isolator 10 amp power 2-2 electronic
protector provides extra electrical protection for all
standard 2 circuit vehicle or RV towing applications and in
addition enhances the towed equipment taillight system. Kit
includes interconnect (easy for back-feed installations) on
60" 4-way connector bracket assembly, hardware kit,
instructions and clam shell packaging.
P/N; EPI3-10-60CW: Isolator 10 amp power 3-3 electronic
protector provides extra electrical protection for all
standard 3 circuit vehicle or RV towing applications and in
addition enhances the towed equipment taillight system. Kit
includes 60" wire harness, hardware kit, instructions and
clam shell packaging.
Taillight converter towing capacity; 1 brake, turn and
taillight, per side, along with 18 marker lights
Power converter towing capacity; 3 brake, turn and
taillights, per side along with 28 marker lights
Note: If converter shuts down, do not replace, locate any
possible shorts on trailer, repair problem area if required
and converter will automatically reset once vehicle functions
(brake, turn and tail) are reactivated. Please carefully read
the product instruction card before installing. The ETS
Product Performer Specialist and Technical Converter
Application Guide is available upon request. |
